remove carpet
remove carpet
remove carpet::Most carpet that a homeowner wants to remove will be installed on top of padding with tack strip along the edges.There may also be some sort of transition metals between the different floor surfaces.
You will probably have a zbar.
When you are removing carpet from a zbar simply pull it out.
When you pull on the carpet the zbar unclamps and releases the carpet.
If you have a clamp down metal you can use a chisel or stair tool to gently pry it open.
Only pry it open just enough to pull the carpet out or else you may break it.
If so, pull the nails out and the metal will just lift away.
If you have a transition where the carpet meets ceramic tile or something of that thickness, chances are that there is nothing holding it in place except the tack strip.
Just like with the zbar, give it a little pull and it should come right out.
If you would like to save some or all of the carpet cut that out first.
This can come in handy if you have any patching to do in the rest of the house or if you would like to replace a few stairs.
Pull the carpet up from along the wall and flip it over.
If i want to dispose of the carpet into the garbage can i cut it into even smaller strips.
Cut it into easy to handle strips using the slotted blade knife.
I normally will stuff it right into heavy duty garbage bags and take it outside right away.
Remove the staples with a pair of pliers.
Use a scraper to remove as much of the stuck pad as is necessary.
Buy the product from the pet store that contains enzymes and use it liberally.
If you need to remove the tack strip you will want to use a pry bar to dislodge it.
Be very careful to not get stuck with one of millions of little nails.
I hope you enjoyed this short article.
It was my pleasure to write it.
remove carpet::After carpet stains have seeped into carpet fibers, if
not removed immediately, they can almost become a permanent fixture
remove carpet
Комментариев нет:
Отправить комментарий