четверг, 29 марта 2012 г.

husqvarna viking presser foot

husqvarna viking presser foot in hidden secret

husqvarna viking presser foot

husqvarna viking presser foot hidden secret

husqvarna viking presser foot hidden secret.I was really tired when i forgot to put my presser foot down on my sewing machine!
What do i do to fix it?
So, i will address both issues for you and others who may have one of the following problems: do you have a major thread jam or is the presser foot stuck in the up position?
For a jam turn off the power, remove the needle and presser foot.
Open the needle plate and carefully cut the thread and gently pull all the tangles out of the bobbin area.
Replace the needle as it may have bent.
Lower and raise the top thread by moving the handwheel by hand to pull up the bobbin thread.
Hand walk the first couple of stitches or hold onto the thread ends as you begin to sew with the presser foot down.
Try raising the presser foot as high as you can and then lower it to the lowest position.
If the machine is electronic, power off and back on may help.
Take several breaks while sewing and relax your shoulders.
If you are still not as alert as you should be, stop.
Ï»¿ i was very fagged when i blocked to put my presser foot down on my sewing machine.
Then i will speak both emergences for you and others who may have one of the following problems : do you have a major thread jam or is the presser foot stuck in the up position.
Ï»¿ then i will speak both emergences for you and others who may have one of the following problems : do you have a major thread jam or is the presser foot stuck in the up position.. husqvarna viking presser foot

Комментариев нет:

Отправить комментарий